www.bitechnologies.com magnetic components selector guide 2006 edition we reserve the right to change specifications without prior notice. 22 electrical / environmental ? operating temperature range -40 c to + 1 55 c ? ambient temperature, maximum 100 c ? temperature rise, maximum 50 c self-shielding molded high -current inductors specifications notes: (1) rate current, i rated , is the approximate current at which inductance will be decreased by 20% from its initial (zero dc) value . (2) the heating current is the dc current, which causes the component temperature to increase by approximately 50 c. this current is determined by soldering the component on a typical application pcb, and then apply the current to the device for 30 minutes. (3) dc resistance is measured at 25 c. inductance heating (2) 100 khz 100 khz, 0.1 v current part @ 0 adc @ i rated i rated (1) (adc) dcr (3) dim d. dim.e number h 10% h min. h typ. (adc) ? t = 5 0 c m ? 5 % (mm 0.5 ) (mm 0. 1 ) HM55A-16R30LF 0.28 0.21 0.25 40 32.8 0.72 12.8 1.48 hm55a-16r56lf 0.56 0.46 0.51 40 27.4 1.15 12.8 1.38 outline dimensions (inch / mm) .197 .02 5.0 0.5 . 012 0. 3 b part number dim. a dim.b dim.c hm55a- 16r30lf .630 .394 .354 16.0 10.0 9.0 hm55a- 16r56lf .630 .394 .453 16.0 10.0 11.5 packaging standard : vacuum tray case size capacity per tray capacity per carton (units) (units) 16 44 660 ordering information inductance code: first 2 digits are signi?cant. last digit denotes the number of trailing zeros. for values below 10 h, r denotes the decimal point. model series hm5 5a 16 r 30 lf case size lead-free refer to specifications table for d & e dimensions of each model. ????? d c max e rohs compliant . 012 0. 3 a
2006 edition magnetic components selector guide we reserve the right to change specifications without prior notice www.bitechnologies.com 23 electrical characteristics @ 25c
|